Active Monitors

Key features:

• 3.5-inch woven-composite, low-frequency driver
• 1-Inch, ultra-low mass, silk-dome, high-frequency driver
• 50 watt Class AB dual amplification
• 80 Hz to 20 kHz frequency response
• 98 dB SPL (Peak, at 1 meter)
• High- and low-frequency Acoustic Tuning controls
• Balanced, 1/4-inch TRS inputs
• Unbalanced, 1/8-inch stereo and RCA inputs
• Integrated stereo headphone amplifier with front-panel output
• RF interference, output-current limiting, and over-temperature

Key features:

• 112 watts of total power
• Image Control Waveguide
• Equipped with acclaimed 3 Series transducers
• Slip Stream low-frequency port
• Dual integrated, custom Class-D amplifiers
• Boundary EQ settings
• HF Trim switch adjusts high-frequency output
• Flexible connectivity, input-sensitivity switch and controls
• Engineered to JBL Linear Spatial Reference design criteria
• Sleek and modern design

Key features:

• 7 Inch high end precision powered studio monitor
• German handmade precision S-ART tweeter
• HPS waveguide creates absolutely precise imaging
• 7 inch Hexacone woofer
• 350 watt RMS amp power
• 35 Hz to 50 kHz (-20 dB) frequency response
• Maximum SPL per pair at 1 m: ≥120 dB
• AES3 digital input
• Ideal choice for use in demanding studio environments

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• High-quality compact studio monitors
• Delivers a sonic platform to build on throughout the mixing process
• 60 Hz to 22 kHz frequency response (-10 dB)
• 26 W and 26 W output power
• Room control and high-trim response controls
• XLR/TRS Phone (COMBO), RCA, and Stereo Mini inputs
• Stereo mini - RCA cable, speaker cable, and anti-slip feet included
• Available in white

Key features:

• 7 Inch high end precision powered studio monitor
• German handmade precision S-ART tweeter
• HPS waveguide creates absolutely precise imaging
• 7 inch Hexacone woofer
• 350 watt RMS amp power
• 35 Hz to 50 kHz (-20 dB) frequency response
• Maximum SPL per pair at 1 m: ≥120 dB
• AES3 digital input
• Ideal choice for use in demanding studio environments

Key features:

• High-quality compact studio monitors
• Delivers a sonic platform to build on throughout the mixing process
• 60 Hz to 22 kHz frequency response (-10 dB)
• 26 W and 26 W output power
• Room control and high-trim response controls
• XLR/TRS Phone (COMBO), RCA, and Stereo Mini inputs
• Available in black color

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch, ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60 degree EBM waveguide for a wide sweet spot
• 80 watt, Class AB bi-amplification
• 48 Hz to 20 kHz frequency response
• 102 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Internal power supply with IEC connector and power switch
• Balanced XLR and 1/4-inch inputs and unbalanced RCA inputs

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• Coaxial 4.5-inch LF driver and 0.75-inch soft-dome HF driver
• Wireless reference mixes with built-in Bluetooth 5.0 streaming
• Integrated 60-watt Class D power amplifier
• Acoustically optimized for desktop placement
• Molded ABS cabinet with contoured low-frequency port
• Three sets of inputs allow for other connections
• Host monitor includes electronics for the extension monitor
• Front-panel volume control
• Front-panel headphone jack with speaker mute feature

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• Bluetooth 5.0 wireless stereo input for mobile devices
• RCA and 1/4-inch balanced​ TRS plus 1/8-inch stereo Aux In
• 100-Watt Class D amplification
• Integrated headphone amplifier with front-panel stereo jack
• 1/4-Inch TRS summed mono subwoofer output

Key features:

• Single point-source coaxial design for wider sweet spot
• 6.5-inch woven composite low-frequency driver
• 1.25-inch, silk-dome, high frequency driver
• 140 watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Wall and ceiling mountable
• 106 dB SPL (Peak, at 1 meter)
• Features acoustic tuning controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature

Key features:

• 20W D-class power amplifier for a higher output level
• 4-inch full-range driver for clear audio reproduction
• Auto standby mode for energy saving
• Flat-panel design to avoid inadvertent power-off
• Detachable IEC type power inlet
• Newly designed mounting bracket for wall mounting

Key features:

• Bi-amplified design with 150 watts (80 LF, 70 HF)
• 8-inch carbon fiber low-frequency driver
• 1.28-inch natural silk dome tweeter
• New computer-optimized tweeter waveguide
• Optimized rear port for extended low-frequency response
• High Frequency Control to fine-tune high-end response
• Acoustic Space Control to fine-tune low-end response
• XLR, 1/4-inch, and unbalanced RCA inputs

Key features:

• 4.5-inch, woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• Fast, reliable, stereo Bluetooth 5.0 wireless input
• 50W (25W per side) Class AB amplification
• 70 Hz to 20 kHz frequency response
• 100 dB SPL (Peak, at 1 meter)
• RCA and 1/4-inch balanced​ TRS rear-panel inputs
• Front-panel 1/8-inch stereo Aux IN for mobile audio devices
• Headphone amplifier with front-panel stereo 1/8-inch jack
• Fine-tune with high- and low-frequency controls

Key features:

• 3.5-inch woven composite low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• RCA and 1/4-inch balanced ​TRS rear-panel inputs
• Front-panel 1/8-inch stereo Aux In for mobile audio devices
• Integrated headphone amplifier with front-panel stereo jack
• Includes Studio Magic music production software

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• Bi-amplified design with 150 watts (80 LF, 70 HF)
• 8-inch carbon fiber low-frequency driver
• 1.28-inch natural silk dome tweeter
• New computer-optimized tweeter waveguide
• Optimized rear port for extended low-frequency response
• High Frequency Control to fine-tune high-end response
• Acoustic Space Control to fine-tune low-end response
• XLR, 1/4-inch, and unbalanced RCA inputs

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• Single point-source coaxial design for the wider sweet spot
• 6.5-inch woven composite low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140 watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Wall and ceiling mountable
• 106 dB SPL (Peak, at 1 meter)
• Features acoustic tuning controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature

Key features:

• Bi-amplified design with 100 watts (60 LF, 40 HF)
• 5-inch carbon fiber low-frequency driver
• 1-inch natural silk dome tweeter
• New computer-optimized tweeter waveguide
• Optimized rear port for extended low-frequency response
• High Frequency Control to fine-tune high-end response
• Acoustic Space Control to fine-tune low-end response
• XLR, 1/4-inch, and unbalanced RCA inputs

Key features:

• Bluetooth connectivity
• Black Kevlar low-frequency drivers with 1-inch tweeters
• New computer-optimized tweeter waveguide
• High-EQ and Low-EQ controls
• Enhanced rear ports for extended low-frequency response
• Left and right Active Speaker Position switch
• Bluetooth, 1/4-inch, 1/8-inch, and RCA inputs
• Front 1/8-inch AUX input for quick connection of smartphones
• Acoustically-inert MDF cabinet with bass reflex design

Key features:

• High-quality compact studio monitors
• Delivers a sonic platform to build on throughout the mixing process
• 70 Hz to 22 kHz frequency response (-10 dB)
• Room control and high-trim response controls
• XLR/TRS Phone (COMBO), RCA, and Stereo Mini inputs
• Available in white color